The Pickup Truck Roll-up Cover Is Leaking, Which Is A Serious Problem

Feb 13, 2025

Leave a message

Water is like air, it can penetrate any hole. When the roll-up cover encounters water, it is really a bad thing. At the same time, whether it is a roll-up cover or other types of rear covers (such as tri-fold covers, three-door rear covers, stamped integral rear covers), as long as there is a leak, it is a troublesome thing.

In more cases, the pickup truck rear cover leaks because its sealing is not enough. The sealing here refers not only to the sealing of the parts of the rear cover itself, but also to the sealing between the rear cover and the car body. Because the pickup truck roll-up cover is an assembled product, the number of its parts is much greater than that of other types of rear covers, so the leakage problem is a complex and representative problem.

Common leakage locations of the pickup truck roll-up cover are the roller shutter leaf, the tail of the slide rail, and the gantry opening. Among them, the leakage at the gantry opening is more due to installation problems.

The first is product quality, which is the root cause of leakage and the root cause of product service life. A set of rolling shutter covers often requires hundreds of parts. If one of the parts does not meet the standards, it may cause water leakage.

In addition, insufficient materials for rolling shutter covers, too thin slide rails, and non-aging sealing strips will all cause water leakage after a period of use.

During the installation of the rolling shutter cover, the front of the slide rail needs to be sealed and glued to ensure the sealing. For models that retain the original gantry, the gantry position needs to be waterproofed.

In short, the reasons behind the leakage of pickup truck rolling shutter covers are roughly the raw materials, product technology, and installation. If you find a strong manufacturer, you will have a rolling shutter cover that does not leak for a long time to a greater extent.

Send Inquiry